FAQ: 1098-T Reporting
- After selecting the Default to Electronic Consent check box on the Maintain 1098-T Consent Policy task, does the Consent for Electronic Delivery report field setting under the Student Institutional Financial Account business object change toTruebefore a student consents?
- No; at this point, selecting theDefault to Electronic Consentcheck box determines only the initial state of the student's My Tasks consent message. The consent setting remainsFalseuntil the student consents to electronic 1098-T delivery. If they ignore the message, Workday has no consent on file to exclude the student from 1098-T mass printing.
- Why does the Manage Paperless 1098-T task still require a student to select a year now that we’re using a lifetime consent policy?
- Even under a lifetime consent policy, the requirement to select a year on theManage Paperless 1098-Ttask is a functional design choice that provides a historical record while allowing students to change their preference for future years. While the task requires a year selection, once a student submits a lifetime election, they don't have to access this task again.
- What happens to a student’s 1098-T electronic consent status when an outdated onboarding event is canceled before they submit their consent preference via My Tasks?
- In this situation, the student's consent status doesn’t change. However, if the student previously made an election, canceling the onboarding event unlocks the student's record, which allows:
- Students to change their election using theManage Paperless 1098-Ttask.
- Administrators to change the election on the student's behalf using theManage Consent for Removal from 1098-T Mass Printtask.
- Can a student still view their 1098-T in Workday if they remove consent to receive a paperless 1098-T?
- Yes, students can always view electronic copies of their 1098-T using theView My 1098-Treport and print paper copies using thePrint My 1098-Ttask.
- How do I change 1098-T printing consent?
- You can use theManage Consent for Removal from 1098-T Mass Printtask to change a student's consent when a student:
- Changes their mind about receiving a paper copy of their 1098-T tax form for a calendar year.
- Provided consent to print by mistake.
Students can use theManage Paperless 1098-Ttask to change their consent. - Are there any scenarios where Workday won't generate a 1098-T?
- Workday won't automatically generate 1098-T forms for students who:
- Have citizenship outside of the United States.
- Are permanent residents or international students, unless you've configured them as eligible on theMaintain 1098-T Optionstask.
- Don't have:
- Any eligible charges for qualified tuition and related expenses (QTRE) in the calendar year.
- Carryover QTRE charges from the previous calendar year.
- Payments in the calendar year.
You can use theGenerate Student 1098-Ttask to generate 1098-Ts manually for students who fall into any of these categories. - Will the 1098-T Outbound integration send 1098-T information for any students who are missing their Taxpayer Identification Number (TIN) or U.S. mailing address?
- Yes. The outbound IRIS integration transmits generated 1098-T payee records selected by the launch parameters, including students who are missing their TIN or U.S. mailing address.For prior tax years that you still file through legacy file-based processes, the same due diligence applies when you use theYou're responsible for compliance with legal requirements by doing your due diligence to collect 1098-T reporting information. The1098-T Audit Reportcan help you identify any student who's missing a TIN or U.S. mailing address.1098-T E-File Outboundintegration.
- Where can I see how Workday calculated 1098-T box values?
- Administrators can use theView 1098-T Box Details for Studentreport to review details about 1098-T boxes. This report includes the charges and payments used to calculate the values and any overridden values. Students can use theMy 1098-T Box Detailsreport to view the box details that you selected in theMaintain 1098-T Optionstask.
- How do I display unmasked TINs to administrators, but also mass-print and mail 1098-T forms with partially masked TINs to students?
- When administrators print 1098-T forms, Workday prints TINs based on the configuration of theTruncate Taxpayer Identification Number (TTIN)check box on theMaintain 1098-T Optionstask. To display unmasked TINs to administrators but print 1098-T forms with partially masked TINs, you must change this configuration when you print the forms.Example:
- Clear the check box to enable administrators to see unmasked TINs.
- Before generating 1098-T forms, select the check box to print partially masked TINs.
- When you've completed 1098-T processing, clear the check box again.
- How are 1098-T forms sorted for mass printing?
- Workday sorts 1098-T forms for mass printing by Address Line1 data.
- Can I configure multiple Transmitter Control Codes (TCCs) for a single company in Workday?
- A: Workday supports one TCC field per country for your integration configuration. This field applies to either legacy FIRE file generation or the current IRIS integration:
- For Form 1098 (IRIS Integration): Enter your IRIS Application-to-Application (A2A) TCC in the Workday configuration to support automated filing.
- For Form 1099 (CSV Upload): A TCC is not used or required in Workday. Enter your Taxpayer Portal TCC directly on the IRS portal when uploading your file.
Since the IRS has retired the FIRE system, configure the TCC field with your IRIS TCC for current reporting. The FIRE TCC is only needed if you are retrospectively generating historical files for tax year 2025 or earlier. - Can still I use the 1098-T E-File Outbound integration after Workday delivers IRIS filing?
- Only during the remaining FIRE filing window for eligible prior tax years. The IRS retires the Filing Information Returns Electronically (FIRE) system on November 19, 2026. After January 1, 2027, IRIS is the only electronic filing system for current-year, prior-year, and correction filings. Use IRIS A2A for tax year 2026 and later.
- How do original, correction, and replacement filings work in IRIS?
- You launch the sameIRS 1098-T Tax Reporting (Outbound) - Generationintegration and select the Transmission Type launch parameter:
- Originalfor initial filings.
- Correctionfor updated data on previously submitted records.
- Replacementfor a batch transmission that the IRS rejected.
- Why should I schedule the IRS 1098-T (Inbound) - Acknowledgement integration?
- You schedule the acknowledgment integration so Workday can automatically retrieve IRS document statuses for your 1098-T transmissions and update those statuses on the related transmission records in Workday. Without the schedule, you would need to manually launch the inbound integration to poll IRIS for status updates.The integration retrieves statuses for transmissions in Processing or Draft status and patches them back to Workday. For how to schedule it and when to stop the schedule, see Submit 1098-T Forms Using IRIS. For document statuses, see 1098-T IRIS Transmissions.
- Where can I report on IRIS transmission statuses?
- Build custom reports with the1098-T IRIS Transmissionsreport data source. Include fields such asTransmission ID,Receipt ID,Transmission Type, andDocument Status.Security:Reports: 1098-Tdomain in the Student Financials functional area.
- Will Workday support manual IRS portal upload for 1098-T?
- No. Workday supports IRIS filing through the IRIS A2A integration only. Institutions that use the IRIS Taxpayer Portal prepare a CSV in the IRS-required format from a Workday custom report and upload it directly to the IRS.
- Do we keep our old FIRE integration after Workday delivers IRIS A2A?
- No for ongoing filing. Use IRIS A2A for new 1098-T electronic filing in Workday. The IRS retires FIRE on November 19, 2026. After January 1, 2027, IRIS is the only electronic filing system for current-year, prior-year, and correction filings. During the remaining FIRE window only, you can still use legacy file-based 1098-T processes for eligible prior tax years if you still file through FIRE.
- Is transmission automatic once we generate 1098-T forms?
- No. You must complete credentials, certificates, and IRIS integration setup before you can transmit. See Set Up 1098-T IRIS Integrations.
- Can we reuse our FIRE Transmitter Control Code (TCC) for IRIS?
- No. Apply for a new IRIS-specific TCC. Do not reuse your FIRE TCC.
- Who is the transmitter when Workday files through IRIS A2A?
- Workday is not a Transmitter. That IRS role is for filing on behalf of other businesses. Workday’s IRIS A2A integration submits using your institution’s Issuer credentials configured in Workday. Your institution remains the official IRS issuer of record.
- Can we still send the FIRE .txt file to our third-party vendor?
- No. That format is discontinued for the third-party path. Build a custom report from 1098-T data and confirm the new format with your vendor. See Process 1098-T Forms Through a Third-Party Vendor.
- Does Workday transmit to the IRS when we use a third-party vendor?
- No. Your vendor is the transmitter. Workday does not currently deliver dedicated third-party IRIS filing support. You build a custom report and send the extract to your vendor.
- Do we need IRS credentials in Workday when a vendor files for us?
- Typically not for vendor filing. Confirm with your vendor who holds the TCC and certificates.
- Does the 1098-T business object change for vendor reporting extracts?
- No. The 1098-T business object for reporting stays the same, so you can create your custom report before filing season.
- Will Workday support our vendor directly?
- Not currently. Use a custom report and coordinate format, testing, and acknowledgments with your vendor. See Process 1098-T Forms Through a Third-Party Vendor.