Skip to main content
Documentatie
Documentatie
Administrator Guide
Laatst bijgewerkt: 2023-06-23
Evaluate Absence Calculations

Evaluate Absence Calculations

Security:
Set Up: Time Off (Calculations - Absence Specific)
 domain in the Time Off and Leave functional area.
You can drill down on the calculation results of a worker's absence accrual from a given date, and use them to verify whether you configured the accruals correctly and identify discrepancies in your configuration.
  1. Access the
    Evaluate Absence Calculation
     report.
  2. Select the parameters for the worker whose absence accrual you want to evaluate.
  3. Enter an 'as of' date that is based on the accrual frequency method.
    Optie Omschrijving
    Start of Period
    Enter the period start date of the period that you want to evaluate. Example: Enter 1/1/18 if you want to evaluate a worker's accrual calculation for January 2018 in a time off plan with a monthly period schedule.
    End of Period
    Enter the period end date of the period that you want to evaluate. Example: Enter 1/31/18 if you want to evaluate a worker's accrual calculation for January 2018 in a time off plan with a monthly period schedule.
You can use the calculation results on the report to analyze the worker's accrual configuration and make changes if necessary. Example: You want to evaluate a worker's accrual calculation for January 2020 in a time off plan with a monthly period schedule. You use either 1/1/20 or 1/31/20 depending on the accrual frequency method.